PRODUCTS > CPU Cooler > Megahalems

Megahalems

Megahalems Features

  • Minimal air resistance between fins allowing best balance between noise and performance in range of 800-1200RPM. For all out performance, fan RPM at 1600 or above is recommended.
  • Heatpipes are lined up in a straight line to prevent air back draft allowing air to easily pass through the heatsink body.
  • Wide fins with mathematically calculated thickness to maximize best air-to-surface cooling rate.
  • Uniquely designed, easy-to-install socket 775 and 1366 retention mechanism to increase cooling ability.
  • Includes easy-to-apply high grade thermal compound, a perfect sidekick to all Prolimatech heatsinks.
  • Specification
  • 3D Drawing
  • Photos
  • Accessories
  • Installation
Heatsink Dimension (L)130mm X (W)74mmX (H)158.7mm
Heatsink Weight 790g
Heatpipe Ø 6mm X 6pcs
Suggest Fan 120mm X 120mm X25mm
Suggest Fan Speed 800~1200rpm
Suggest Noise Level (dBA) Below 26dBA
Air Flow 57CFM
Direction of heatsink Faces the rear exhaust system fan

Socket 775 Backplate

Socket 1366 Backplate

Double End Stud with Nut

Aluminum Strip Adapter

Screw Nut

Aluminum Mounting Plate

Spring-loaded Screw

Fan Mounting Clip

Thermal Compound
Step 1
Screw in by hand the shorter end of the double end stud to the selected backplate that is placed underneath the socket.
Step 2
Place each of the two aluminum strip adapters on each side of the socket.
Step 3
To stabilize the aluminum strip adapter, use the screw
nuts.
Step 4
Spread out evenly the thermal compound on the CPU and on the bottom of heatsink base.
Step 5
Place the heatsink on the CPU and insert the aluminum mounting plate between the heatpipes. Use a screw driver to tighten the spring-loaded screws to the aluminum mounting plate.
Step 6
Install the fan mounting clips to the heatsink. Secure the fan by the clips.
Step 7
Installation complete.