PRODUCTS > VGA Cooler >MK-13
MK-13
MK-13 Features
- Installation of one 140mm fan (at 1000-1200 rpm) can effectively cool two VGA cards
- Can be installed with a maximum of four fans in an one-card configuration under the right conditions
- Cools both the GPU and VGA card surrounding
- Will not produce ceiling effect like other competitors’ VGA coolers
- Interchangeable Mounting hardware for installation on future released VGA cards
- Fan Secure System to allow creative fan configuration
- Premium soldering on all contact points for maximum heat conduction
- Six high quality nickel-plated copper heatpipes
- No additional weight is put on the VGA card since cooling fans are not installed directly onto the heatsink
- Leading-edge heatsink design allowing best heat absorption and dissipation ratio
- Specification
- Compatibility
- Photos
- Accessories
- Installation
| Heatsink Dimension | (L)205mm X (W)99.87mmX (H)43.5mm |
| Heatsink Weight | 550g |
| Heatpipe | Ø 6mm X 6pcs |
| Suggest Fan | 90/120/140mm X25mm |
| Suggest Fan Speed | 800~1600rpm |
| Suggest Noise Level (dBA) | Below 26dBA |
| Air Flow | 57CFM |
| Direction of heatsink | Faces the VGA card |
3D Drawing
Warning！To ensure a more steady installation, a chassis with at least 20cm of width is strongly recommeded.
| Compatibility List | |||
 |
 |
||
| Geforce GTX 250 | V | Radeon HD 3850 | V |
| Geforce GTX 260 | V | Radeon HD 3870 | V |
| Geforce GTX 275 | V | Radeon HD 4830 | V |
| Geforce GTX 280 | V | Radeon HD 4850 | V |
| Geforce GTX 285 | V | Radeon HD 4870 | V |
| Geforce 7800 GT | V | Radeon HD 4890 | V |
| Geforce 7800 GTX | V | Radeon HD 5850 | V |
| Geforce 7900 GS | V | Radeon HD 5870 | V |
| Geforce 7900 GT | V | ||
| Geforce 7900 GTX | V | ||
| Geforce 8800 GT(G92) | V | ||
| Geforce 8800 GTS(G92) | V | ||
| Geforce 8800 GTX | V | ||
| Geforce 8800 Ultra | V | ||
| Geforce 9600 GT | V | ||
| Geforce 9800 GT | V | ||
| Geforce 9800 GTX | V | ||
| Geforce 9800 GTX+ | V | ||
| Geforce GTX 460 | X | ||
| Geforce GTX 470 | V | ||
| Geforce GTX 480 | X | ||
| Case Compatibility V=Compatible X=Incompatible | ||
| Silverstone | RV02 | X |
*MK-13 Compatibility Notice for SLI/CrossFire Configuration
For each MK-13, there has to be a clearance of at least 50mm (from GPU).
SLI/CF configuration will not work if the second MK-13 extends beyond the motherboard, unless your chassis allows enough headroom (50mm).
MK-13 installation
MK-13 fan installation