Accessory
> Products > Accessory
StaticBooster 14The StaticBooster 14 is a unique accessory specifically engineered for use with the Ultra Sleek Vortex 14 fan. By increasing the focus of the airflow, the StaticBooster 14 increases the static pressure and performance of the Ultra Sleek Vortex 14 fan. In addition, the StaticBooster 14 acts as a buffer on the fan, helping to further reduce fan vibration and noise.
 
Magnetic PinThe Magnetic Pin is a unique rubber pin that magnetically attaches your system fan to your case.  The special composition of rubber will absorb vibrations and reduce fan noise.  The magnets embedded in the pin allow you to quickly install and remove your fans as needed, no tools required! Comes in two colors, choice of black or blue.
 
FMK-01 (Fan Mounting Kit)The Fan Mounting Kit provides you with the ability to mount an additional four fans inside your case!  It is an excellent cooling solution for cases with poor air flow, especially smaller case designs like HTPCs.
 
Mounting Kit For LGA 2011Looking to make the switch to LGA2011, with LGA2011 mounting kit, you can use Genesis, Megahalems(and Super Mega), and Armageddon to LGA2011 motherboard.
 
Intel Socket 1156/1155/1150/1151 Adapter Kit (For Megahalems)The first version of Megahalems was for LGA775 and LGA1366. For those who purchased the early version and would like to switch to LGA1156/1155/1150/1151 system, you can keep your original Megahalems and get this Intel Socket 1156/1155/1150/1151 Adapter Kit.
 
ARM-03 (For AMD2/AM2+/AM3/AM3+/FM1/FM2)Looking to turn your Prolimatech heatsink into an AMD CPU cooler?  The ARM-03, an update to the ARM-02, is both easier to install and more affordable.  Works with Megahalems and Armageddon only.

With ARM-03, you get the option to choose any direction your Prolimatech heatsink faces; either parallel or perpendicular to your rear exhaust system fan, provided that you have enough space inside your computer.
As always, you can count on high-quality and great performance that Prolimatech has come to be known.

Note: Prolimatech AM3 Retention Mount Adapter Kit will only work with Prolimatech heatsink products. Prolimatech will not be held responsible should any damage occur due to improper installation or due to installation on products other than Prolimatech's


 
Megahalems 12025 Fan Wire ClipMegahalems 12025 Fan Wire Clip has a set of wire clips for a single-fan installation of 120x120x25mm. These work only on all versions of Prolimatech Megahalems. You can install on either side of the Megahalems.
 
Megahalems 14025 Fan Wire ClipMegahalems 14025 Fan Wire Clip has a set of wire clips for a single-fan installation of 140x140x25mm. These work only on all versions of Prolimatech Megahalems. You can install on either side of the Megahalems.  

 
Megahalems 12025/14025 Fan Wire ClipMegahalems 12025/14025 Fan Wire Clip has a set of wire clips for a single-fan installation of 120x120x25mm or 140x140x25mm. These work only on all versions of Prolimatech Megahalems. You can install on either side of the Megahalems.
 
Megahalems 12038 Fan Wire ClipMegahalems 12038 Fan Wire Clip has a set of wire clips for a single-fan installation of 120x120x38mm. These work only on all versions of Prolimatech Megahalems. You can install on either side of the Megahalems.
 
Genesis 12025 Fan Wire ClipGenesis 12025 Fan Wire Clip has a set of wire clips for a single-fan installation of 120x120x25mm. These work only on all versions of Prolimatech Genesis.
 
Genesis 14025 Fan Wire ClipGenesis 14025 Fan Wire Clip has a set of wire clips for a single-fan installation of 140x140x25mm. These work only on all versions of Prolimatech Genesis.
 
Genesis 12025/14025 Fan Wire ClipGenesis 12025/14025 Fan Wire Clip has a set of wire clips for a single-fan installation of 120x120x25mm or 140x140x25mm. These work only on all versions of Prolimatech Genesis. 
 
120mm ArmaClip (For Armageddon)ArmaClips, an alternative to wire clips that provide an even stronger hold on the fan to your Armageddon CPU heatsink while allowing you to adjust vertically, are now available for 12cm fans!
 
GTX460 Adapter Kit (For MK-13) 
 
Megahalems Series USV 14 Fan Wire ClipMegahalems Series USV 14 Fan Wire Clip includes TWO sets of clips for TWO Ultra Sleek Vortex 14 (USV 14) fans' installation of 140x140x15mm.  These work only on all versions of Prolimatech Megahalems.
Megahalems Series USV 14 Fan Wire Clip also works for TWO Ultra Sleek Vortex 12 (USV 12) fan's installation of 120x120x15mm.

 
Genesis Series USV 14 Fan Wire ClipGenesis Series USV 14 Fan Wire Clip includes TWO sets of clips for TWO Ultra Sleek Vortex 14 (USV 14) fans' installation of 140x140x15mm.  These work only on all versions of Prolimatech Genesis.
 
Armageddon Series USV 14 Fan Wire ClipArmageddon Series USV 14 Fan Wire Clip includes TWO sets of clips for TWO Ultra Sleek Vortex 14 (USV 14) fans' installation of 140x140x15mm.  These work only on all versions of Prolimatech Armageddon.
Armageddon Series USV 14 Fan Wire Clip also works for TWO Ultra Sleek Vortex 12 (USV 12) fan's installation of 120x120x15mm.
 
MK-26 Series USV 14 fan clipMK-26 Series USV 14 Fan Wire Clip includes TWO sets of clips for TWO Ultra Sleek Vortex 14 (USV 14) fans' installation of 140x140x15mm.  These work only on all versions of Prolimatech MK-26.